You have no items in your shopping cart.
Product Description
Turnigy 5A-1S ESC a very small and light brushless speed controller which supports 1S (3.7-4.2v) lipo cell with built-in 0.5A/5v BEC output. Perfect for micro-heli and indoor flyers.
Features:
Microprocessor controlled
Extremely low resistance
3A continous(5A surge)
1S lipo cell or 3 cell NiMH/NiCAD
High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
BEC: Max 0.5A (switching)
Low Voltage Cutoff: 3.0v
Programmable cutoff types(soft cutoff/hard cutoff)
Programmable brake type(disable/soft brake/hard brake)
Time advance programmable (low/standard/high)
Programmable current limiting(very ensitive/standard/insensitive/disable)
Programmable startup type(very soft start/soft start/fast start)
Thermal Protection(100 centigrade)
Safe power on arming program ensures motor will not accidentally turn on.
Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
Note: Programmable with Turnigy monster programing card.
Features:
Note: Programmable with Turnigy monster programing card.
Additional Information
| BEC | 5V / 0.5A |
| Constant Current | 3A |
| Burst Current | 5A |
| Battery | 1 cell lipo / 3 cell NiXX |
| Weight | 2g |
| Size | 25 x 13 x 5mm |
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
